Detailed Product Description

Our production line contains the hot rolled clading machines CA Technology, the AGC controlled cold rolled devices and the hot rolling mill with protective atmosphere.

The surface of copper clad steel strip is covered with copper and the core is superior low carbon steel with the characteristics of well-clad,good shape,nice deep draw ability and conductivity.THe performance of copper clad steel is similar with brass,but the consumption is small.

As the high quality,good performance and low cost,the copper clad steel is used in production of stamping and drawing parts,covering parts and connectors.

At present,it is the best substitution of the copper strip which used in the areas of electronic,communication.hardware.decoration and radiators.

Copper clading metal strip Production capacity:
- About 5000ton per month
- Copper clading metal plate: the thickness from 0.05mm to 3.55mm, all available
- Copper clading metal strip: the thickness from 0.20mm to 1.20mm, all available
- Copper clading metal width: 120mm,160mm and etc

Especially For the Hard Copper clading metal strip thickness of 0.20mm,0.28mm and 0.30mm(the tensile strength ≥ 600MPa)
 
For gilding metal strip:
- Min trial order 1 ton each thickness
- Min normal order 4tons each thickness

The Mechanical property and chemical composition standard: the China Military standard and the Deep Drawing EN10139/10140

The Gilding metal for making bullets and cartridges
Thickness: 0.20-3.55mm, the clading thickness is 4-6% of the base steel per side
Width: 120mm, 140mm, 160mm and etc
Material: deep drawing based steel,brass(CuZn90,CuZn10,CuZn85,etc)